engine block
美 
英
- un.发动机组；发电机本体
- 网络机体；发动机缸体；气缸体
英汉解释
英英解释
例句
To borrow an image from Jim Butcher (one of my favourite authors), it's like lifting an engine block out of a car.
借用我最喜欢的作家吉姆.巴切笔下的一个形象说法，就象从车里抬出引擎。
Instead of circulating fluid through the engine, the engine block is covered in aluminum fins that conduct the heat away from the cylinder.
发动机不是用液体循环冷却，而是在发动机上装有铝制散热片，使热量从气缸排除机体外。
the fluid leaving the pump flows first through the engine block and cylinder head, then into the radiator and finally back to the pump.
液体从水泵流出进入发动机箱和气缸缸体，然后进入散热器最后回到水泵。
The oil pan bolts under the engine block, where it seals off the bottom of engine.
该油底壳螺栓下，发动机缸体，而海豹小康底部的引擎。
The thermal data processing module estimates a second heat transfer from the engine oil to an engine block of the engine.
该热数据处理模块估算自发动机油到发动机的发动机机体的第二热传递。
A variable density based topology optimization method was applied to the light-weight design of engine block.
将变密度拓扑优化方法应用于发动机气缸体轻量化设计中。
Engine Block: it forms the main framework or foundation, of the engine. The block is cast mainly from gray iron or iron alloy.
汽缸体：气缸体构成发动机的主体。气缸体主要由灰口铁或铁合金铸成。
combination of CNC machine tools And the transformation of the overhaul and engine block, cylinder head of the export processing businesses.
数控组合机床的大修与改造以及发动机缸体、缸盖的出口加工业务。
US and UK rules require shouts, waves, flares, warning shots and shots into the engine block, before using lethal force.
美国和英国要求在使用致命武器前要呼喊，挥动，鸣枪警告并射向障碍物。
Flywheel fixed on the back-end crank, to reach out beyond the engine block, responsible for external power output.
飞轮固定于曲轴后端，伸出到发动机缸体之外，负责对外输出动力。
The large amount of heat generated by the engine block has to be dissipated.
由发动机组产生的大量的热必须散出去。
Touch the other probe of the multimeter to a clean, unpainted surface on the engine block ground.
将另一根万用表表笔接触清洁的、未喷漆的发动机缸体接地的表面。
Engine block is made of aluminum alloy, with cast iron cylinder liner inserts.
发动机缸体是由铝合金，铸铁缸套与插入。
Aimed at the engine block, this thesis directly researches its radiated noise field using FEM and BEM.
针对气缸体，本文应用有限元与边界元相结合的方法直接对其进行了辐射声场的研究。
in fact, the only option is an engine block heater ($35).
实际上，唯一的选择是引擎块加热器（$35美金）。
And power plants, steel mills and cement plants, shipping and agriculture the engine block and other sets of anti-corrosion and anti-bite.
以及电站、钢厂和水泥厂、船运和农业引擎套座等的防腐蚀和抗咬合。
To reduce piston pumping losses engine block is equipped with air passages in the block webbings between cylinders.
为了减少损失，发动机缸体活塞泵配备与气缸之间的空中通道块织带。
According to modified engine block computer model, redid FEA to test and verify the result showed that after modification.
根据改进后的机体计算机模型进行有限元重分析，验证机体改进的效果。
For, once the engine block and the gearbox are gone, the game of car design changes.
因为一旦引擎和变速箱消失的话，汽车的设计也将随之变化。
Engine block: set consisting the motor, the clutch and the gearbox.
发动机缸体：包括发动机，离合器和变速箱的装置。
Residual stress analysis of an engine block casting (Half of the casting, the stress along the axis direction of casting)
发动机缸体铸件残余应力分析（半个缸体，沿缸体轴线方向残余应力）
Luckily none of the bullets hit the engine block. So, we made it to the border, but just barely ,
幸运的是没有子弹打到发动机组。所以，我们按时到达了边境，但差点儿就不行了，
Measurement of Dynamic Stresses and Temperatures of Main Bearing Walls and Caps on an Engine Block
发动机缸体主轴承座及主轴承盖的动态应力和温度测量
Casting Method of Furan Sand Mould for a Heavy Diesel Engine Block
柴油机缸体的树脂砂铸造工艺
I get fluid built up in my engine block,
老啰，引擎积水，不中用啰
Design of the Special Measuring Instrument for Vertical Degree of the Engine Block
汽车发动机缸体垂直度专用测量仪设计
Structural Dynamic Response Analysis of Multi-Cylinder Engine Block under Exciting of Main Bearing Forces
主轴承力作用下的多缸内燃机机体结构动力响应分析
Experiment on Application of Antimon-Containing Compound Inoculant to Diesel Engine Block
含锑复合孕育剂在柴油机缸体上的应用试验
A Pump-circulation Plug-in Engine Block Heater and its Preheating Start Test
一种泵循环机体电预热器及其预热启动试验
The Application of Finite Element Model in the Rigidity and Strength Optimization Design of Engine Block
有限元在柴油机机体刚度和强度优化设计中的应用
Technical Mechanism of Laser Surface Treatment for Motorcycle Engine Block
摩托车发动机缸体激光表面处理技术机理
Measure of Reduce Diesel Engine Crankshaft Fracture and Prevent Engine Block Damage
减少柴油机曲轴断裂，防止大部件破损的几点措施
Casting Method and Melting Process Improvement to Increase Mechanical Properties of 8320 Model Diesel Engine Block
提高8320型柴油机气缸体力学性能的工艺改进
A study on Structure, Properties and Machinability of Materials of Sedan Car Engine Block
轿车缸体材质与加工性能的研究
Optimizing Modal Test Options for Engine Block Using FEA Pretest Analysis Method
利用有限元预分析优化机体模态测试方案
Prevent and Control Engine Block Damage for Chinese Diesel Locomotive
国产内燃机车机破的有效预防与控制探讨
Modal experiment and analysis of resin based composite engine block
聚合物基复合材料发动机体的模态试验分析
Finite Element Simulation for Filling Process of Engine Block Casting
柴油机机体铸造充型过程有限元模拟
Machining process for monolithic cast engine block
整体铸造柴油机机体加工工艺
Solution to Failed Products, Shell Core Bore Core in Diesel Engine Block
柴油机气缸体壳芯钻芯废品问题的解决
